|
Name
|
Description
|
|
FetchDutyCycle
|
Returns the ratio of the pulse on-time to off-time.
|
|
FetchEdgeDelay
|
Returns time offset from the trigger reference to the first mesial transition level of either slope on the waveform.
|
|
FetchFallTime
|
Returns the interval between the last signal crossing of the distal line to the last signalcrossing of the proximal line.
|
|
FetchIEEEBottom
|
Returns the IEEE-define base line, i.e. The two portions of a pulse waveform which represent the first nominal state from which a pulse departs and to which it ultimately returns.
|
|
FetchIEEETop
|
Returns the IEEE-defined top line, i.e. the portion of a pulse waveform which represents the second nominal state of a pulse.
|
|
FetchOfftime
|
Returns the time a repetitive pulse is off. (Equal to the pulse period minus the pulsewidth).
|
|
FetchOvershoot
|
Returns the difference between the distortion following a major transition and the IEEE top line in dB or percent, depending on the channel units.
|
|
FetchPeriod
|
Returns the interval between two successive pulses. (Reciprocal of the Pulse RepetitionFrequency)
|
|
FetchPRF
|
Returns the number of cycles of a repetitive signal that take place in one second (Pulse Repetition Frequency).
|
|
FetchPulseCycleAvg
|
Returns the average power of the entire pulse.
|
|
FetchPulseOnAverage
|
Average power of the ON portion of the pulse.
|
|
FetchPulsePeak
|
Returns the peak amplitude during the pulse.
|
|
FetchRiseTime
|
Returns the interval between the first signal crossing of the proximal line to the first signal crossing of the distal line.
|
|
FetchWidth
|
Returns the pulse width, i.e. the interval between the first and second signal crossings of the mesial line.
|
|
ReadDutyCycle
|
Returns the ratio of the pulse on-time to off-time.
|
|
ReadEdgeDelay
|
Returns time offset from the trigger reference to the first mesial transition level of either slope on the waveform.
|
|
ReadFallTime
|
Returns the interval between the last signal crossing of the distal line to the last signalcrossing of the proximal line.
|
|
ReadIEEEBottom
|
Returns the IEEE-define base line, i.e. The two portions of a pulse waveform which represent the first nominal state from which a pulse departs and to which it ultimately returns.
|
|
ReadIEEETop
|
Returns the IEEE-defined top line, i.e. the portion of a pulse waveform which represents the second nominal state of a pulse.
|
|
ReadOfftime
|
Returns the time a repetitive pulse is off. (Equal to the pulse period minus the pulsewidth).
|
|
ReadOvershoot
|
Returns the difference between the distortion following a major transition and the IEEE top line in dB or percent, depending on the channel units.
|
|
ReadPeriod
|
Returns the interval between two successive pulses. (Reciprocal of the Pulse RepetitionFrequency)
|
|
ReadPRF
|
Returns the number of cycles of a repetitive signal that take place in one second (Pulse Repetition Frequency).
|
|
ReadPulseCycleAvg
|
Returns the average power of the entire pulse.
|
|
ReadPulseOnAverage
|
Average power of the ON portion of the pulse.
|
|
ReadPulsePeak
|
Returns the peak amplitude during the pulse.
|
|
ReadRiseTime
|
Returns the interval between the first signal crossing of the proximal line to the first signal crossing of the distal line.
|
|
ReadWidth
|
Returns the pulse width, i.e. the interval between the first and second signal crossings of the mesial line.
|
