|
Name
|
Description
|
|
Read Duty Cycle
|
Returns the ratio of the pulse on-time to off-time.
|
|
Read Edge Delay
|
Returns time offset from the trigger reference to the first mesial transition level of either slope on the waveform.
|
|
Read Fall Time
|
Returns the interval between the last signal crossing of the distal line to the last signalcrossing of the proximal line.
|
|
Read Offtime
|
Returns the time a repetitive pulse is off. (Equal to the pulse period minus the pulsewidth).
|
|
Read Overshoot
|
Returns the difference between the distortion following a major transition and the IEEE top line in dB or percent, depending on the channel units.
|
|
Read Period
|
Returns the interval between two successive pulses. (Reciprocal of the Pulse RepetitionFrequency)
|
|
Read Pulse Cycle Avg
|
Returns the average power of the entire pulse.
|
|
Read Pulse On Average
|
Average power of the ON portion of the pulse.
|
|
Read Pulse Peak
|
Returns the peak amplitude during the pulse.
|
|
Read Rise Time
|
Returns the interval between the first signal crossing of the proximal line to the first signal crossing of the distal line.
|
|
Read Width
|
Returns the pulse width, i.e. the interval between the first and second signal crossings of the mesial line.
|
|
ReadIEEE Bottom
|
Returns the IEEE-define base line, i.e. The two portions of a pulse waveform which represent the first nominal state from which a pulse departs and to which it ultimately returns.
|
|
ReadIEEE Top
|
Returns the IEEE-defined top line, i.e. the portion of a pulse waveform which represents the second nominal state of a pulse.
|
|
ReadPRF
|
Returns the number of cycles of a repetitive signal that take place in one second (Pulse Repetition Frequency).
|
