|
Set or return the point on a pulse, which is used to define the end of the pulse's active interval.
Namespace: Boonton.Boonton55xxx.Interop
Assembly: Boonton.Boonton55xxx.Interop (in Boonton.Boonton55xxx.Interop.dll)
Visual Basic
|
Public Property EndGate As Single
|
C#
|
public float EndGate { get; set; }
|
Visual C++
|
HRESULT get_EndGate(
float* val
);
HRESULT put_EndGate(
float val
);
|
Property Value
Set or return the point on a pulse, which is used to define the end of the pulse's active interval.
Remarks
This point is defined in percent of the total pulse duration, with 0% corresponding to the midpoint of the rising edge, and 100% corresponding to the midpoint of the falling edge, as defined by the mesial setting. For most pulse on average power measurements, it is desirable to exclude the rising and falling intervals, and only measure power over the active portion of the pulse. This is often known as time gating, and is used for the automatic pulse measurements returned by READ:ARRay:AMEASure:POWer.
 Units
Percent
Instrument Command
SENSe{Channel}:PULSe:ENDGT {value}
SENSe{Channel}:PULSe:ENDGT?
Range
60 ≤ value ≤ 100
Requirements
Supported Models
All supported
See Also
Reference
IBoonton55xxxChannelPulseDefinitions Interface
Boonton.Boonton55xxx.Interop Namespace
Copyright 2013-16 Boonton. All rights reserved.
|