Syntax

Top Previous Next


Boonton55xxx IVI Driver Reference

BTN55XXX_ATTR_DISTAL Attribute
Pulse See Also

Set or return the pulse amplitude percentage, which is used to define the end of a rising edge or beginning of a falling edge transition.

Attribute Tree Node: \Boonton55xxx\Instrument Specific\Channel\Pulse\Distal

Declaration: Btn55xxx.h

Implementation: Btn55xxx.dll

Visual C++

#define BTN55XXX_ATTR_DISTAL 1150031
ViStatus Btn55xxx_GetAttributeViReal64(
ViSession Vi,
ViConstString RepCapIdentifier,
ViAttr AttributeID,
ViReal64* AttributeValue
);
ViStatus Btn55xxx_SetAttributeViReal64(
ViSession Vi,
ViConstString RepCapIdentifier,
ViAttr AttributeID,
ViReal64 AttributeValue
);

Parameters

The ViSession handle that you obtain from the IviDriver_init or IviDriver_InitWithOptions function. The handle identifies a particular instrument session.

RepCapIdentifier

A physical or virtual repeated capability identifier. For valid values, see the Channel repeated capability.

AttributeID

Must be BTN55XXX_ATTR_DISTAL.

AttributeValue (GetAttribute)

Returns the current value of the attribute. The user must specify the address of a variable that has the same data type as the attribute.

AttributeValue (SetAttribute)

The value to which to set the attribute.

Remarks

Typically, this is 90% voltage or 81% power relative to the top level of the pulse. This setting is used when making automatic pulse risetime and falltime calculations returned by READ:ARRay:AMEASure:POWer.

Instrument Command

SENSe{Channel}:PULSe:DISTal {value}

SENSe{Channel}:PULSe:DISTal?

Range

50 ≤ value ≤ 100

Requirements

Supported Models

All supported