|
|
Boonton55xxx IVI Driver Reference
|
|
|
BTN55XXX_ATTR_END_GATE Attribute
|
|
Pulse See Also
|
|
Set or return the point on a pulse, which is used to define the end of the pulse?s active interval.
Attribute Tree Node: \Boonton55xxx\Instrument Specific\Channel\Pulse\End Gate
Declaration: Btn55xxx.h
Implementation: Btn55xxx.dll
Visual C++
|
#define BTN55XXX_ATTR_END_GATE 1150034
ViStatus Btn55xxx_GetAttributeViReal64(
ViSession Vi,
ViConstString RepCapIdentifier,
ViAttr AttributeID,
ViReal64* AttributeValue
);
ViStatus Btn55xxx_SetAttributeViReal64(
ViSession Vi,
ViConstString RepCapIdentifier,
ViAttr AttributeID,
ViReal64 AttributeValue
);
|
Parameters
Vi
The ViSession handle that you obtain from the IviDriver_init or IviDriver_InitWithOptions function. The handle identifies a particular instrument session.
RepCapIdentifier
A physical or virtual repeated capability identifier. For valid values, see the Channel repeated capability.
AttributeID
Must be BTN55XXX_ATTR_END_GATE.
AttributeValue (GetAttribute)
Returns the current value of the attribute. The user must specify the address of a variable that has the same data type as the attribute.
AttributeValue (SetAttribute)
The value to which to set the attribute.
Remarks
This point is defined in percent of the total pulse duration, with 0% corresponding to the midpoint of the rising edge, and 100% corresponding to the midpoint of the falling edge, as defined by the mesial setting. For most pulse on average power measurements, it is desirable to exclude the rising and falling intervals, and only measure power over the active portion of the pulse. This is often known as time gating, and is used for the automatic pulse measurements returned by READ:ARRay:AMEASure:POWer.
 Instrument Command
SENSe{Channel}:PULSe:ENDGT {value}
SENSe{Channel}:PULSe:ENDGT?
Range
60 ≤ value ≤ 100
Requirements
Supported Models
All supported
See Also
Reference
Pulse
Btn55xxx
Copyright 2013-16 Boonton. All rights reserved.
|