Syntax

Top Previous Next


Boonton55xxx IVI Driver Reference

Btn55xxx_InitiateAquisition Function
Acquisition See Also

Starts a single measurement cycle when INITiate:CONTinuous is set to OFF. In Modulated Mode, the measurement will complete once the power has been integrated for the full FILTer time. In Pulse Mode, enough trace sweeps must be triggered to satisfy the AVERaging setting. In Statistical Mode, acquisition stops once the terminal condition(s) are met. In each case, no reading will be returned until the measurement is complete. This command is not valid when INITiate:CONTinuous is ON, however, by convention this situation does not result in a SCPI error

Function Tree Node: \Boonton55xxx\Instrument Specific\Acquisition\Initiate Aquisition

Declaration: Btn55xxx.h

Implementation: Btn55xxx.dll

Visual C++

ViStatus Btn55xxx_InitiateAquisition(
ViSession Vi
);

Parameters

The ViSession handle that you obtain from the IviDriver_init or IviDriver_InitWithOptions function. The handle identifies a particular instrument session.

Return Value

Success or failure code.

Instrument Command

INITiate

Requirements

Supported Models

All supported