Syntax

Set or return the trigger delay time in seconds with respect to the trigger for the trigger display location in the LEFT position. Positive values cause the actual trigger to occur after the trigger condition is met. This places the trigger event to the left of the trigger point on the display, and is useful for viewing events during a pulse, some fixed delay time after the rising edge trigger. Negative trigger delay places the trigger event to the right of the trigger point on the display, and is useful for looking at events before the trigger edge.

Function Tree Node: \Boonton55xxx\Instrument Specific\Trigger\Set Delay

Declaration: Btn55xxx.h

Implementation: Btn55xxx.dll

Parameters

Vi

The ViSession handle that you obtain from the IviDriver_init or IviDriver_InitWithOptions function. The handle identifies a particular instrument session.

Delay

Set or return the trigger delay time in seconds with respect to the trigger for the trigger display location in the LEFT position. Positive values cause the actual trigger to occur after the trigger condition is met. This places the trigger event to the left of the trigger point on the display, and is useful for viewing events during a pulse, some fixed delay time after the rising edge trigger. Negative trigger delay places the trigger event to the right of the trigger point on the display, and is useful for looking at events before the trigger edge.

Return Value

Success or failure code.

Instrument Command

TRIGger:DELay {value}

Requirements

Supported Models

All supported

See Also

Reference

Trigger

Btn55xxx

Copyright 2013-16 Boonton. All rights reserved.