Channel

	Name	Description
	Auto Cal	Performs a multi-point sensor gain calibration of the selected sensor with the internal calibrator. This method is not valid for 55 Series USB power meters.
	Auto Cal Query	Performs a multi-point sensor gain calibration of the selected sensor with the internal calibrator and returns true if successful. This method is not valid for 55 Series USB power meters.
	Enable Capture Priority	Sets the 55 series power meter to a buffered capture mode and disables real time processing.
	Fixed Cal	Performs a calibration at a fixed frequency and level.
	Fixed Cal Query	Performs a calibration at a fixed frequency and level and returns true if successful.
	Get Average	Set or return the number of traces averaged together to form the measurement result on the selected channel.
	Get Bandwidth	Set or return the sensor video bandwidth for the selected sensor.
	Get Current Temp	Return current sensor internal temperature in degrees C
	Get Enabled	Set or return the measurement state of the selected channel. When the value is true, the channel performs measurements; when the value is false, the channel is disabled and no measurements are performed.
	Get Filter State	Set or return the current setting of the integration filter on the selected channel.
	Get Filter Time	Set or return the current length of the integration filter on the selected channel.
	Get Firmware Version	Returns the firmware version of the power meter associated with this channel.
	Get Mem Chan Archive	Returns an XML document containing settings and readings obtained using the SaveToMemoryChannel method.
	Get Model	Model number of the meter connected to the specified channel.
	Get Peak Hold Decay	Set or return the number of min/max traces averaged together to form the peak hold measurement results on the selected channel.
	Get Peak Hold Tracking	Sets or returns whether peak hold decay automatically tracks trace averaging. If set to true, the peak hold decay and trace averaging values are the same. If set to false, peak hold decay is indepedent.
	Get Serial Number	Serial number of the sensor.
	Get Units	Set or return units for the selected channel. Voltage is calculated with reference to the sensor input impedance. Note that for ratiometric results, logarithmic units will always return dBr (dB relative) while linear units return percent.
	Load Mem Chan From Archive	Loads the named memory channel using the given archive. If the memory channel does not exist, one is created.
	Save To Memory Channel	Saves the given channel to a memory channel. If the memory channel does not exist, a new one is created.
	Save User Cal	Instructs power meter to save the value of fixed cal, zero, and skew values.
	Set Average	Set or return the number of traces averaged together to form the measurement result on the selected channel.
	Set Bandwidth	Set or return the sensor video bandwidth for the selected sensor.
	Set Enabled	Set or return the measurement state of the selected channel. When the value is true, the channel performs measurements; when the value is false, the channel is disabled and no measurements are performed.
	Set Filter State	Set or return the current setting of the integration filter on the selected channel.
	Set Filter Time	Set or return the current length of the integration filter on the selected channel.
	Set Peak Hold Tracking	Sets or returns whether peak hold decay automatically tracks trace averaging. If set to true, the peak hold decay and trace averaging values are the same. If set to false, peak hold decay is indepedent.
	Set Units	Set or return units for the selected channel. Voltage is calculated with reference to the sensor input impedance. Note that for ratiometric results, logarithmic units will always return dBr (dB relative) while linear units return percent.
	Zero Channel	Performs a zero offset null adjustment.
	Zero Query	Performs a zero offset null adjustment and returns true if successful.

	Name	Description
	Average	Set or return the number of traces averaged together to form the measurement result on the selected channel.
	Bandwidth	Set or return the sensor video bandwidth for the selected sensor.
	Current Temp	Return current sensor internal temperature in degrees C
	Enabled	Set or return the measurement state of the selected channel. When the value is true, the channel performs measurements; when the value is false, the channel is disabled and no measurements are performed.
	Filter State	Set or return the current setting of the integration filter on the selected channel.
	Filter Time	Set or return the current length of the integration filter on the selected channel.
	Firmware Version	Returns the firmware version of the power meter associated with this channel.
	FPGA Version	Returns the FPGA version for the power meter associated with this channel.
	Model	Model number of the meter connected to the specified channel.
	Peak Hold Decay	Set or return the number of min/max traces averaged together to form the peak hold measurement results on the selected channel.
	Peak Hold Tracking	Sets or returns whether peak hold decay automatically tracks trace averaging. If set to true, the peak hold decay and trace averaging values are the same. If set to false, peak hold decay is indepedent.
	Serial Number	Serial number of the sensor.
	Units	Set or return units for the selected channel. Voltage is calculated with reference to the sensor input impedance. Note that for ratiometric results, logarithmic units will always return dBr (dB relative) while linear units return percent.

Branches

Functions

Attributes

See Also

Reference